Simple Package:
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +M9N GPS+3DR Power Module+ GPS Holder + Shock Absorber+ Shock AbsorberSafety Button And Buzze +3Line(4PGH1.25,6PGH1.25,2.54Pin)
Stangard package:
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO+PPM+I2C+M9N GPS+3DR PoWer Module+GPS Holder+ Shock Absorber+ Shock Absorber+Safety Button And Buzzer+3Line(4P GH1.25,6PGH1.25,2.54Pin)
High Pacage:
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO+PPM+I2C+RGB LED+OLED+M9N GPS+3DR Power Module+ GPS Holder+ Shock Absorber+ Shock Absorber+Safety Button And Buzzer +3Line(4PGH1.25,6PGH1.25,2.54Pin)
433MHZ 100MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +M9N GPS+3DR Power Module+Radio V5 433 100MW+GPS Holder+Shock Absorber+ Safety Button And Buzzer + 3Line(4PGH1.25,6PGH1.25,2.54Pin)
433MHZ 500MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +I2C +RGB LED+OLED+M9N GPS+3DR Power Module+Radio V5 433MHZ 500MW+GPS Holder+Shock Absorber+Safety Button And Buzzer +3Line(4PGH1.25,6PGH1.25,2.54Pin)
433MHZ 1000MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +I2C +RGB LED+OLED+M9N GPS+3DR Power Module+RadioV5 433MHZ 1000MW+GPS Holder+Shock Absorber+Safety Button And Buzzer +3Line(4P GH1.25,6PGH1.25,2.54Pin)
915MHZ 100MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +M9N GPS+3DR Power Module+Radio V5 915 100MW+GPS Holder+Shock Absorber+ Safety Button And Buzzer + 3Line(4PGH1.25,6PGH1.25,2.54Pin)
915MHZ 500MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +I2C +RGB LED+OLED+M9N GPS+3DR Power Module+Radio V5 915 500MW+GPS Holder+Shock Absorber+Safety Button And Buzzer +3Line(4PGH1.25,6PGH1.25,2.54Pin)
915MHZ 1000MW :
F350+4 PCS BLHELI 30A +4 pairs self-locking 8045 Propellers +4 PCS 2212920KVmotor
PIXHAWK PRO +I2C +RGB LED+OLED+M9N GPS+3DR Power Module+Radio V5 915MHZ 1000MW+GPS Holder+Shock Absorber+Safety Button And Buzzer +3Line(4P GH1.25,6PGH1.25,2.54Pin)
This manual provides instructions on how to assemble your new drone frame and recommends compatible components such as motors, electronic speed controllers (ESCs), and propellers.
Package Contents
Carbon fiber drone frame (300/350/380/450mm arm span)
Landing gear
Mounting screws and accessories
Assembly Instructions
- Motor Mounting
Attach the motors to each corner of the drone frame using the mounting screws provided.
Ensure that the motor direction is correct: front-left, back-left, front-right, and back-right.
- Electronic Speed Controller (ESC) Mounting
Mount the ESCs near the motors, ensuring they are securely attached to the drone frame.
- Battery Mounting
Securely attach the battery to the bottom of the drone frame using the designated mounting points.
- Flight Controller Mounting
Mount the flight controller in the center of the drone frame, making sure it is level and secure.
- Landing Gear Installation
Install the landing gear onto the drone frame according to the manufacturer's instructions.
- Propeller Mounting
Attach the recommended propellers to the motors, following the proper direction: CW for front motors and CCW for rear motors.
Recommended Components List
Motors: 2212 (e.g., T-Motor, EMAX, or similar)
Electronic Speed Controllers (ESCs): 30A (e.g., Simonk firmware)
Propellers: 6/7/810-inch (e.g., HQProp, Gemfan, or similar)
Safety Precaution
Always wear protective goggles when working with drones and their components. Keep fingers and other body parts away from spinning propellers during assembly and operation.
Assembly Tips
Make sure all connections are secure and tight before testing the drone.
Balance the weight distribution by placing heavier components closer to the center of the drone.
Calibrate your ESCs and flight controller according to the respective manuals.
Flight Test
After completing the assembly, perform a series of tests to ensure everything works correctly:
Power up the drone without props to check for any issues.
Perform a bench test with props installed but no throttle applied to verify motor directions.
Gradually increase throttle while holding the drone down to confirm motor rotation and stability.
Once satisfied with the results, proceed to hover and fly the drone outdoors.
Remember to always follow local regulations and guidelines for drone flying.
Conclusion
Congratulations! You have successfully assembled your drone frame and equipped it with recommended components. Enjoy your aerial adventures responsibly and safely!
M9N PS Module
M9N is a GPS module commonly used in unmanned aerial vehicles, with the following characteristics and applications:
-
High precision positioning: The M9N adopts advanced GNSS technology, supports multiple satellite navigation systems, and can provide high-precision position positioning information. For unmanned aerial vehicles, it can achieve accurate positioning and navigation.
Multi system support: The M9N supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, BeiDou, etc. This allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability.
Quick positioning: M9N has fast cold start and hot start times, which can quickly obtain satellite signals and perform positioning, making it crucial for the rapid takeoff and task execution of unmanned aerial vehicles.
M9N can search for more satellites outdoors with higher accuracy, faster search speed, and better stability.(The specific number of star searches is determined by the environment at that time.)
A.Features
A1: Use authentic electronic components to ensure high quality and enhance the current endurance ability of the ESC.
A2: Based on BLHeli firmware, optimized for high performance with great linearity and much quicker throttle response.
A3: Special designed for multirotors, and compatible with fixed-wing aircrafts and helicopters.
A4: Multiple protection features including Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
A5: Throttle range can be configured and is fully compatible with all receivers, providing smooth, linear and precise throttle response. A6: All parameters can be programmed via using a transmitter, including default settings.
B. Productspecification
8045 Propellers
Radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.
