MARK4 V2 7-inch

F4V3S flight controller

F4V3S flight controller Item Specifics:
Product Name: F4 Flight Controller Board
Material: Electronic component
Standard Board Size: about 36x36mm
Standard Size of Mount Hole: 30.5x30.5mm

Features:
-STM32 F405 MCU
-Dshot support
-Drag and Drop OSD configured via Betaflight Configurator
-Smartaudio v2 support  Tune your PID's and configure the omnibus F C from your Transmitter
-BMI270 6 axis SPI Gyro & Accelerometer
-SBUS/PPM AND Spketrum dsm-x Ports
-SD card blackbox
-Baro(BMP280)
-5V 3A SBEC
-On-board Video Filter(only can supply 5V to VTX and Camera)
-SmartAudio V2 via tx6 on J10
-4×3 pin ESC pin layout
-IR pins for lap timing transponder

F4V3S PLUS Flight Controller

Features:

1. The F4V3S PLUSis a 3-6S 36x36mm mini flight controller with amicroSD card blackbox, 5V dual BEC. Designed for easy maintenance and low interference.
2. 2.  The PCB adopts high-end composite material, which has stronger overcurrent capability and good heat dissipation. MOS adopts imported high current resistance mos, low energy consumption, long life and strong load capacity.
3. 3. Using industrial grade LDO, high temperature resistance. High-quality capacitors, strong filtering performance.

Specifications:

• Chip:STM32F405(168MHZ)
• Gyro:BMI270
• Barometer:BMP280
• OSD Chip:AT7456E
• Black box:MicroSD card blackbox
• LED Program:Support
• BB buzzer:Support
• Input voltage:3-6S
• I2C Connector:Support
• BEC:5V/2.5A
• Cam Input:Support
• USART:UART1.UART3.UART6
• Receiver:ELRS(CRSF).TBS(CRSF).SBUS.IBUS.DSM2.DSMX
• GPS:YES
• COMPASS:YES
• ESC Signal:Dshoot150.Dshot300,Dshot600
• USB:TYPE-C
• Current Port:Yes.
• Voltage Sensor:Yes
• DFU Button:YES
• FC firmware:OMNIBUSF4SD.hex(betaflight) / OMNIBUSF4V3.hex(inav)
• Install hole:30.5*30.5*4MM
• Board size:36*36MM
• Weight:7.6g

If you want to upload Betaflight firmware, you should enter USE_ACCGYRO_BMI270 at Custom Defines

F4V3S:

F4V3S PLUS:

VTX1000 1W Video Transmitter

Description:
Model: MINI MS-1672 FPV cameras
Sensor: 1/1/8 "CMOS D1080H
Horizontal resolution: 2000TVL
Horizontal field of view: 165
Lens: 2.1mm lens
Video format: NTC&PAL (adjustable)
Image scale: 4:3&16:9 (automatic recognition)
Wide Dynamic Range: Super WDR
Noise reduction: 3DNR
Low illumination: 0.001LUX
Video output: CVBS
Day and night: external/internal/black and white/color
Language: (English/Chinese/Traditional Chinese/pyccnna)
ESOABIK/TTASSNO/FRABCAUS/
POSDIM/PORTUGUES/Japanese
Electronic Shutter: PAL: 1/50-100000NTSC: 1/60-100000
Wide voltage input: 5-36V
Working temperature: -20-60
Weight: 110g
Dimensions: 19 19 19mm
Resolution: 960 * 1080

Feature:
Upgraded Mista 2000TVL 2.1mm Wide Angle HD 1080P CCD PAL/NTSC Switchable 16:9 OSD FPV Camera.

Package included:
1 x Upgraded Mista FPV Camera

Shaft Diameter:4.Omm
Motor Mount:19*19mm（M2*4）
Configuration:12N14P
Motor Cable:18#AWG 220mm
KV Value:1300KV,1500KV and 1800KV or customed KV
Recommend:7"inch prop application

A2807KV 1300KV Motor Specification
Max pull:1996g
Volts:24V(6S)
Suggested ESC:40A~60A
Maximum Power:895.7W
Suggested Prop:GF7043 inch prop

A2807KV 1500KV Motor Specification
Max pull:2199g
Volts:24V（6S)
Suggested ESC:60A~70A
Maximum Power:1098.8W
Suggested Prop:GF7043 inch prop

A2807KV 1800KV Motor Specification
Max pull:1614g
Volts:16V（4S）
Suggested ESC:50A~70A
Maximum Power:636.1W
Suggested Prop:GF7043 inch prop

 

AM32-45A ESC Hardware:

• ESC Firmware: AM32_NEUTRON_G071_1.91.hex
• Processor: 32-bit ARM Cortex STM32G071GBU6TR, frequency up to 64 MHz
• PWM carrier frequency: 48kHz
• ESC protocol: PWM/DShot300/DShot600 (Recommended to use DShot300)
• Power input support: 3-6S (11.1V-27V)
• Maximum continuous operating current: 45A (requires adequate heat dissipation and cannot operate in a sealed environment)
• MOSFET Parameters: 40V 0.75mΩ Ultra-Low On-Resistance
• Galvanometer output: 12.75 mV/A
• Weight: 3.2g（Not include Line),6.6g(include Line)
• Board size: 35MM * 18MM
• Recommended Usage Scenario: 3.5-10 inch FPV Racing Drone

AM32-MultiRotor-ESC Firmware

Firmware for ARM based speed controllers The AM32 firmware is designed for STM32 ARM processors to control a brushless motor (BLDC). The firmware is intended to be safe and fast with smooth fast startups and linear throttle. It is meant for use with multiple vehicle types and a flight controller. The firmware can also be built with support for crawlers. For crawler usage please read this wiki page Crawler Hardware

Features

AM32 has the following features:

• Firmware upgradable via betaflight passthrough, single wire serial or arduino
• Servo PWM, Dshot(300, 600) motor protocol support,Recommended to use Dshot300
• Bi-directional Dshot
• KISS standard ESC telemetry
• Variable PWM frequency
• Sinusoidal startup mode, which is designed to get larger motors up to speed

BLHELI_S 45A 4IN1 3-6S Brushless ESC 

Size: 41*39.5*5mm

Hole distance: 30.5*30.5/5mm

Weight: 13g

Input voltage: LIPO 2-6S

Continuous current: 45A

Maximum current: 50A (10 seconds)

Processor: EFM8BB21F16G

Firmware: BLS J_H_30_REV16_7

Drive signal support: DShot300-600/Multishot/Oneshot/PWM

Current sensor: Support

The ESC has filter capacitors on board to suppress the electromotive power transmission, stabilize the battery voltage and protect the components of ESC vuelo control precision

BLHELI_S 60A 4IN1 3-6S Brushless ESC

Size: 41*39.5*5mm

Hole distance: 30.5*30.5/5mm

Weight: 13g

Input voltage: LIPO 2-6S

Continuous current: 60A

Maximum current: 70A (5 seconds)

Firmware: BLS J_H_30_REV16_7

Drive signal support: DShot300-600/Multishot/Oneshot/PWM

Current sensor: Support

The ESC has filter capacitors on board to suppress the electromotive power transmission, stabilize the battery voltage and protect the components of ESC vuelo control precision

ELRS 2.4G Receiver RX

Product Description:

ExpressLRS aims to provide the best completely open, high refresh radio control link while maintaining a maximum achievable range at that rate with low latency.

SPECIFICATIONS 1

●Brand:B-CUBE

●Model:ELRS 2.4G NANO

●RF Freq:2.4Ghz

●IC:SX1281+ESP8285

●TX Power:100mW

●Color:Black

●Connector:IPEX 1

●Input Power:3.6-5.5V

●Weight:0.4g(receiver only)

●Size:11mm*18mm

●Firmware: BETAFPV Nano 2400 RX 3.3.0

Package Included:

Nano Receiver x 1

T type receiver antenna x 1

Heat shrink tube x 1

30AWG Silicone Wire x 4LiteRadio 3 Radio Transmitter

LiteRadio 3 is a remote control radio transmitter designed primarily for RC models, including multirotor, airplanes. It gives you more than you ever thought possible from an entry-level 8-channel radio.

8 channels in total.

USB Joystick support for most practice simulators.

Nano module bay for external TX module.

Newly designed joystick gimbal for longer usage life.

Support BETAFPV Configurator for updating, configuring, and tuning.

Provide ExpressLRS 2.4G protocol version .

Built-in 2000mAh battery and USB charge supported.