MARK4 HD 5 Inch 240mm Frame Kit Compatible with DJI FPV Air Unit
Recommended Configuration:
-Flight control:RF/Kiss/F4/F3/F7
-Motor:2204/2205/2206/2207/2305/2306/2407
-ESC:20A-50A
-Battery:3S-6S 1500-2200mAh
-Material: 3K Carbon Fiber
-Frame Type: H
-Wheelbase: 240mm
-Propeller Size: 5 Inch
-Size: 145*172mm
-Weight: 120g
-Top Plate: 2.5mm
-Bottom Plate: 2.5mm
-Arm: 5mm
Camera installation distance: 19mm-20mm
-Image transmission installation hole distance: compatible 30.5mm/20mm
-Flight control installation hole distance: compatible 30.5mm/20mm
MARK4 V2 7inch
MARK4 V2 8inch
3K Carbon Fiber Frame MARK4 V2 8inch 367mm WheelBase RC FPV Freestyle Racing Drone Frame Kit
Description:Model: MAK4 V2 8inchWheelbase: 367mmWeight: about 214gThickness of bottom plate: 3mmThickness of top plate: 2mmThickness of camera arm: 6mmCamera side panel thickness: 2.5mmCamera mounting hole spacing: 19 mmMapping mounting hole spacing 20*20mm & 30.5*30.5mmFlight Control Mounting Pitch: 30.5*30.5mmInner space height: 35mmMotor mounting hole pitch: 16*16mm & 19*19mm
The rack uses external nuts, not nuts built into the carbon fiber board. Nuts built into the carbon fiber board are prone to loosening during flying , so using external nuts is more secure and safe.When fixing, please use external nuts to secure.
3K Carbon Fiber Frame MARK4 V2 8inch 367mm WheelBase RC FPV Freestyle Racing Drone Frame Kit
The rack uses external nuts, not nuts built into the carbon fiber board. Nuts built into the carbon fiber board are prone to loosening during flying , so using external nuts is more secure and safe.When fixing, please use external nuts to secure.
MARK4 V2 9inch
3K Carbon Fiber Frame MARK4 V2 9inch 387mm WheelBase RC FPV Freestyle Racing Drone Frame Kit
Model: MAK4 V2 9inch
Wheelbase: 387mm
Weight: about 220g
Thickness of bottom plate: 3mm
Thickness of top plate: 2mm
Thickness of camera arm: 6mm
Camera side panel thickness: 2.5mm
Camera mounting hole spacing: 19 mm
Mapping mounting hole spacing 20*20mm & 30.5*30.5mm
Flight Control Mounting Pitch: 30.5*30.5mm
Inner space height: 35mm
Motor mounting hole pitch: 16*16mm & 19*19mm
The rack uses external nuts, not nuts built into the carbon fiber board. Nuts built into the carbon fiber board are prone to loosening during flying , so using external nuts is more secure and safe.When fixing, please use external nuts to secure.
3K Carbon Fiber Frame MARK4 V2 9inch 387mm WheelBase RC FPV Freestyle Racing Drone Frame Kit
Model: MAK4 V2 9inch
Wheelbase: 387mm
Weight: about 220g
Thickness of bottom plate: 3mm
Thickness of top plate: 2mm
Thickness of camera arm: 6mm
Camera side panel thickness: 2.5mm
Camera mounting hole spacing: 19 mm
Mapping mounting hole spacing 20*20mm & 30.5*30.5mm
Flight Control Mounting Pitch: 30.5*30.5mm
Inner space height: 35mm
Motor mounting hole pitch: 16*16mm & 19*19mm
The rack uses external nuts, not nuts built into the carbon fiber board. Nuts built into the carbon fiber board are prone to loosening during flying , so using external nuts is more secure and safe.When fixing, please use external nuts to secure.
MARK4 V2 10inch
3K Carbon Fiber Frame MARK4 V2 10inch 427mm WheelBase RC FPV Freestyle Racing Drone Frame Kit
Description:
Model: MAK4 V2 10inch
Wheelbase: 427mm
Weight: about 227g
Thickness of bottom plate: 3mm
Thickness of top plate: 2mm
Thickness of camera arm: 6mm
Camera side panel thickness: 2.5mm
Camera mounting hole spacing: 19 mm
Mapping mounting hole spacing 20*20mm & 30.5*30.5mm
Flight Control Mounting Pitch: 30.5*30.5mm
Inner space height: 35mm
Motor mounting hole pitch: 16*16mm & 19*19mm
The rack uses external nuts, not nuts built into the carbon fiber board. Nuts built into the carbon fiber board are prone to loosening during flying , so using external nuts is more secure and safe.When fixing, please use external nuts to secure.
BLHELI_S 45A /60A 4IN1 3-6S Brushless ESC
BLHELI_S 45A 4IN1 3-6S Brushless ESC
Size: 41*39.5*5mm
Hole distance: 30.5*30.5/5mm
Weight: 13g
Input voltage: LIPO 2-6S
Continuous current: 45A
Maximum current: 50A (10 seconds)
Processor: EFM8BB21F16G
Firmware: BLS J_H_30_REV16_7
Drive signal support: DShot300-600/Multishot/Oneshot/PWM
Current sensor: Support
The ESC has filter capacitors on board to suppress the electromotive power transmission, stabilize the battery voltage and protect the components of ESC vuelo control precision
BLHELI_S 60A 4IN1 3-6S Brushless ESC
Size: 41*39.5*5mm
Hole distance: 30.5*30.5/5mm
Weight: 13g
Continuous current: 60A
Maximum current: 70A (5 seconds)
Maximum current: 70A (5 seconds)
Firmware: BLS J_H_30_REV16_7
Drive signal support: DShot300-600/Multishot/Oneshot/PWM
Current sensor: Support
The ESC has filter capacitors on board to suppress the electromotive power transmission, stabilize the battery voltage and protect the components of ESC vuelo control precision
Shaft Diameter:4.Omm
Motor Mount:19*19mm（M2*4）
Configuration:12N14P
Motor Cable:18#AWG 220mm
KV Value:1300KV,1500KV and 1800KV or customed KV
Recommend:7"inch prop application
A2807KV 1300KV Motor Specification
Max pull:1996g
Volts:24V(6S)
Suggested ESC:40A~60A
Maximum Power:895.7W
Suggested Prop:GF7043 inch prop
