PIXHAWK PRO
Features：
1. Simple folding parts, one-key folding, saving time and effort;
2. The super-large motor base can be built-in ESC to solve the messy wiring on the center board.
3. 2.0MM carbon fiber hollow design center board, saving time for disassembly and assembly.
4. Intelligent electric tripod, remote control one-key contraction, making the flight more beautiful.
Parameters：
Symmetrical motor wheelbase: 1100MM
Arm diameter: 25MM
LX1100 6 Axle Package can lift 10KG(use 6S or 12S Battery)
PIXHAWK PRO
Features:
Pixhawk PRO support the latest official ardupilot firmware and PX4 firmware.
1. The advanced 32-bit ARM CortexM4 high-performance processors(2MB flash), can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
10.TYPE-C USB port
11.GH1.25 port
Specifications:
Interface
1.5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External TYPEC USB Interface
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+M9N GPS+3DR Power Module+ GPS Holder + Shock Absorber+Safety Button And Buzzer+3Line(4PGH1.25,6PGH1.25,2.54Pin)
Standard package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+PPM Encoder+I2C Expansion Board+M9N GPS+3DR Power Module+GPS Holder+ Shock Absorber+Safety Button And Buzzer+3Line(4P GH1.25,6PGH1.25,2.54Pin)
High Package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+PPM Encoder+I2C Expansion Board+RGB LED+OLED Screen+M9N GPS+3DR Power Module+ GPS Holder+
Shock Absorber+Safety Button And Buzzer+3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 100MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +M9N GPS+3DR Power Module+Radio V5 433/915MHZ 100MW+GPS Holder+Shock Absorber+
Safety Button And Buzzer +3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 500MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +I2C Expansion Board+RGB LED+OLED Screen+M9N GPS+3DR Power Module+Radio V5 433/915MHZ 500MW+GPS Holder+Shock Absorber+Safety Button And Buzzer+3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 1000MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +I2C Expansion Board+RGB LED+OLED Screen+M9N GPS+3DR Power Module+Radio V5 433/915MHZ 1000MW+GPS Holder+Shock Absorber+Safety Button And Buzzer+3Line(4P GH1.25,6PGH1.25,2.54Pin)
M9N GPS Module With IST8310 Compass
M9N is a GPS module commonly used in unmanned aerial vehicles, with the following characteristics and applications:
High precision positioning: The M9N adopts advanced GNSS technology, supports multiple satellite navigation systems, and can provide high-precision position positioning information. For unmanned aerial vehicles, it can achieve accurate positioning and navigation.
Multi system support: The M9N supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, BeiDou, etc. This allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability.
Quick positioning: M9N has fast cold start and hot start times, which can quickly obtain satellite signals and perform positioning, making it crucial for the rapid takeoff and task execution of unmanned aerial vehicles.
Strong anti-interference ability: M9N has excellent anti-interference performance, which can work stably in complex electromagnetic environments and is not susceptible to interference from other electronic devices.
In drone applications, M9N can be used in the following aspects:
Positioning and Navigation: The M9N provides accurate position and speed information to help drones achieve precise navigation and flight control.
Waypoint navigation: By inputting pre-set waypoint information into M9N, unmanned aerial vehicles can automatically fly according to the route, achieving autonomous waypoint navigation tasks.
Multi aircraft collaboration: Multiple drones can use the M9N module for positioning and synchronization to achieve applications such as team collaborative flight and formation flight.
Return to return: The M9N can provide accurate return positioning information, enabling the drone to safely return to the takeoff point or preset return point.
M9N can search for more satellites outdoors with higher accuracy, faster search speed, and better stability.(The specific number of star searches is determined by the environment at that time.)
LX1100 6Alex Frame*1
6215 170KV Motor Support 6S-12S
B-CUBE-Pro-80A-HV V3 ESC
B-CUBE-Pro-80A-HV V3 for Multicopter
Specification:
Voltage: 6-14S lithium battery. Current 80A. Weight 195g
Without BEC. Without fan (no need for fan)
Power cord (red and black line) No. 12 silicone wire, length: 14cm.
Motor line (3 black lines) No. 14 silicone wire, length: 70cm
Signal line (black and white line) Length: 25cm
Shell waterproof.
Model: B-CUBE-Pro-80A-HV V3 ESC
Drive mode: BLDC
Continues Current :80A
Instantaneous Current (10 seconds) : 100A
Output lithium battery Section number : 6-14s
Parameter Programming Features: Automatic angle (High / medium)
01 Warnings
Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.
Ensure all devices are well connected to prevent poor connection that may cause your multi-rotor to lose control or other unpredictable issues such
as damage to the device.
Read through the manuals of all power devices and ensure the power configuration is rational before using this unit.
Please use a soldering iron (ensuring it’s connected to a GND wire) with the power of at least 60W to solder all input/output wires and connectors.
Stop using the ESC when its casing temperature exceeds 100℃, otherwise your ESC will get destroyed and may also get your motor damaged.
Please swap any two ESC-to-motor wires if the motor runs in reverse.
02 Features
Special core program for multi-rotor controllers greatly improves throttle response.
Specially optimized software for excellent compatibility with multi-rotor motors.
Microprocessor powered by independent DC regulator has better anti-interference performance greatly reduces the risk of losing control.
Separate signal wires for reminding user of RPM output & error states.
All settings except the timing are preset, making usage simple, high intelligent and adaptive.
Compatible with various flight-controller and supports a signal frequency of up to 621Hz.
DEO (Driving Efficiency Optimization) technology for better throttle linearity and higher driving efficiency.
PWM frequency of 18KHz.
3 Pairs 3K Carbon Fiber Propeller
The new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installation
Using carbon content of 100% pure imported Toray carbon fiber 3K woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.
OLED Module can display some message.
Radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.
