PIXHAWK PRO
Features：
1. Simple folding parts, one-key folding, saving time and effort;
2. The super-large motor base can be built-in ESC to solve the messy wiring on the center board.
3. 2.0MM carbon fiber hollow design center board, saving time for disassembly and assembly.
4. Intelligent electric tripod, remote control one-key contraction, making the flight more beautiful.
Parameters：
Symmetrical motor wheelbase: 1100MM
Arm diameter: 25MM
LX1100 6 Axle Package can lift 10KG(use 6S or 12S Battery)
PIXHAWK PRO
Features:
Pixhawk PRO support the latest official ardupilot firmware and PX4 firmware.
1. The advanced 32-bit ARM CortexM4 high-performance processors(2MB flash), can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
10.TYPE-C USB port
11.GH1.25 port
Specifications:
Interface
1.5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External TYPEC USB Interface
Simple Package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+M10 GPS+3DR Power Module+ GPS Holder + Shock Absorber+ Shock Absorber Safety Button And Buz+3Line(4PGH1.25,6PGH1.25,2.54Pin)
Standard package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+PPM Encoder+I2C Expansion Board+M10 GPS+3DR Power Module+GPS Holder+ Shock Absorber+Safety Button And Buzzer+3Line(4P GH1.25,6PGH1.25,2.54Pin)
High Package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO+PPM Encoder+I2C Expansion Board+RGB LED+OLED Screen+M10 GPS+3DR Power Module+ GPS Holder+
Shock Absorber+Safety Button And Buzzer+3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 100MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +M10 GPS+3DR Power Module+Radio V5 433/915MHZ 100MW+GPS Holder+Shock Absorber+
Safety Button And Buzzer +3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 500MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +I2C Expansion Board +RGB LED+OLED Screen+M10 GPS+3DR Power Module+Radio V5 433/915MHZ 500MW+GPS Holder+Shock Absorber+Safety Button And Buzzer+3Line(4PGH1.25,6PGH1.25,2.54Pin)
433/915MHZ 1000MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK PRO +I2C Expansion Board+RGB LED+OLED Screen+M10 GPS+3DR Power Module+RadioV5 433/915MHZ 1000MW+GPS Holder+Shock Absorber+Safety Button And Buzzer+3Line(4P GH1.25,6PGH1.25,2.54Pin)
M10 GPS Module With IST8310 Compass
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass.This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
LX1100 6Alex Frame*1
01 Warnings
Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.
3 Pairs 3K Carbon Fiber Propeller
Radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.
