RCtoSky LX1100 6Axle Hexacopter
Features
1. Simple folding parts, one-key folding, saving time and effort;
2. The super-large motor base can be built-in ESC to solve the messy wiring on the center board.
3. 2.0MM carbon fiber hollow design center board, saving time for disassembly and assembly.
4. Intelligent electric tripod, remote control one-key contraction, making the flight more beautiful.
Parameters
Symmetrical motor wheelbase: 1100MM
Arm diameter: 25MM
PIXHAWK 6C PRO
Key Design Points
High performance STM32H743 Processor with more computing power & RAM
Build-in Buzzer,Build-in RGB LED,support Independent external Safety Button,With Plastic Case
New cost-effective design with low-profile form factor
Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUS
Technical Specification
Processors & Sensors
FMU Processor: STM32H743
32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAMIO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
Accel/Gyro: ICM-42688-P
Accel/Gyro: BMI055
Mag: IST8310
Barometer: MS5611
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
TELEM1 Max output current limiter: 1.5A
All other port combined output current limiter: 1.5A
Mechanical data
Dimensions: 85 * 45 * 10 mm
Weight (Plastic Case) : 33g
Simple Package:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK 6C PRO(white or black shell)+2'PWM Module+Safety Button+4G TF Card+M10 GPS+GPS Holder
+Shock Absorber+PM02 V3.2 Power Modulo(support 12S)
High Pacage:
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C Expansion Board +RGB LED Module+ Safety Button+4G TF Card+M10 GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S)
433/915MHZ 100MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK 6C PRO(white or black shell)+2*PWM Module+ Safety Button+4G TF Card M10 GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module (support 12S)+Radio Telemetry V6 433/M915HZ 100MW
433/915MHZ 500MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C ExpansIon Board +RGB LED Module+Safety Button+4GTF Card+M10 GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S)+Radio Telemetr V6 433/915MHZ 500MW
433/915MHZ 1000MW :
LX1100 Full Carbon Fiber+ 6 pcs B-CUBE 80A Brushless ESC+
3 Pairs 3K Carbon Fiber Propeller 2255+6 PCS 6215 170KV Motor +
PIXHAWK 6C PRO(white or black shell)+2*PWM Module+I2C Expansion Board+RGB LED Module+ Safety Button+4G TF Card+M10 GPS+GPS Holder+Shock Absorber+PM02 V3.2 Power Module(support 12S)+Radio Telemetry V6 433/915MHZ 1000MW
M10 GPS Module With IST8310 Compass
M10 GPS for Pixhawk2.4.8: used for Pixhawk2.4.8
M10 GPS for Pixracer R15:used for Pixracer R15
M10 GPS for Pixhawk 6C :used for PIXHAWK 6C
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass.This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
M10 GPS for Pixhawk2.4.8: used for Pixhawk2.4.8
M10 GPS for Pixracer R15:used for Pixracer R15
M10 GPS for Pixhawk 6C :used for PIXHAWK 6C
The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.
It also comes with the IST8310 compass.This module ships with a baud rate of 115200 5Hz.
The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.
Firmware Support for M10 GPS:
PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer is required.
LX1100 6Axle
6215 170KV Motor （Support 6S-12S）
B-CUBE-Pro-80A-HV V3 ESC
B-CUBE-Pro-80A-HV V3 for MulticopterSpecification:Voltage: 6-14S lithium battery. Current 80A. Weight 195gWithout BEC. Without fan (no need for fan)Power cord (red and black line) No. 12 silicone wire, length: 14cm.Motor line (3 black lines) No. 14 silicone wire, length: 70cmSignal line (black and white line) Length: 25cmShell waterproof.Model: B-CUBE-Pro-80A-HV V3 ESCDrive mode: BLDCContinues Current :80AInstantaneous Current (10 seconds) : 100AOutput lithium battery Section number : 6-14sParameter Programming Features: Automatic angle (High / medium)
01 Warnings
Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.
Ensure all devices are well connected to prevent poor connection that may cause your multi-rotor to lose control or other unpredictable issues suchas damage to the device. Read through the manuals of all power devices and ensure the power configuration is rational before using this unit. Please use a soldering iron (ensuring it’s connected to a GND wire) with the power of at least 60W to solder all input/output wires and connectors. Stop using the ESC when its casing temperature exceeds 100℃, otherwise your ESC will get destroyed and may also get your motor damaged. Please swap any two ESC-to-motor wires if the motor runs in reverse.02 Features Special core program for multi-rotor controllers greatly improves throttle response. Specially optimized software for excellent compatibility with multi-rotor motors. Microprocessor powered by independent DC regulator has better anti-interference performance greatly reduces the risk of losing control. Separate signal wires for reminding user of RPM output & error states. All settings except the timing are preset, making usage simple, high intelligent and adaptive. Compatible with various flight-controller and supports a signal frequency of up to 621Hz. DEO (Driving Efficiency Optimization) technology for better throttle linearity and higher driving efficiency. PWM frequency of 18KHz.
6215 170KV Motor （Support 6S-12S）
B-CUBE-Pro-80A-HV V3 ESC
01 Warnings
Ensure all wires and connections are well insulated before connecting the ESC to related devices, as short circuit will damage your ESC.
3 Pairs 3K Carbon Fiber Propeller
The new propeller-type aerial dedicated full carbon paddle paddle-type three-hole installationUsing carbon content of 100% pure imported Toray carbon fiber 3K woven, high temperature and pressure precast precision machining, hardness higher than conventional products market.
Radio Telemetry V6:
